New Building, Replacement Investment
High Quality Products
We set high standards on our work: We create the best air-technical solution for our customers, which in the long term is the most economical one.
That's why we developed KappaQ. The concept follows a holistic approach. It does not neglect any aspect and simplifies all complex relationships. KappaQ is the tool with which we can work out an optimal overall solution for every individual goal of our customers.
KappaQ is based on five modules, which in turn are optimized by five levers (5x5 concept).
Module 01: Emission As complete as possible collection and separation of industrial emissions
Module 02: Energy Lowest energy requirements and the best possible recovery of energy
Module 03: Safety Highest security
Module 04: Comfort Optimal comfort and ergonomics, ease of use and maintenance
Module 05: Value Maximum value retention and longevity
Lever 01: Q-Design Optimal selection, design, and sizing of the solution
Lever 02: Q-Components Optimal design and sizing of components
Lever 03: Q-Recovery Recovering emissions and energy
Lever 04: Q-OnDemand Adjustment of plant operation to meet your needs
Lever 05: Q-LongUse Lifetime service
When optimizing ventilation systems, not only individual areas must be considered, the entire process chain must be analyzed. The result of holistic optimization: The best ventilation solution, which in the long term is also the most economical.
EMISSIONS AND WASTE HEAT from industrial manufacturing often suffer employees, facilities, buildings and the environment.
The challenges for the factory of the future are obvious: processes must become safer, more efficient and cleaner, and energy resources must be spared.
This is the aim of our innovative and integrated systems, plants and all accompanying services. Our services are characterized by a high degree of innovation and give our customers a clear competitive advantage.
We offer our customers convenience and an efficient technological solution, which is also the most economical and cost-effective in the long term.
We do not supply components. We create high performance solutions for our customers.
We think holistically: from the problem analysis, the planning, over the intensive consultation and optimal support up to a reliable after sales service.
Three steps to a turnkey solution.
Consulting & Planning - Consulting and Engineering
Consulting and planning
Conducting studies and expertise
Survey of the actual situation (AIRqualityScan, EnergyScan)
Elaboration of different approaches
Evaluation of different approaches
Recommendation for an optimal solution
Engineering for explosion-technical installations (according to ATEX)
Construction - Turnkey Solutions (Turnkey Solutions)
Plant design (basic engineering)
Government support (submission documents, facility approval procedure, authority engineering)
Plant Detail Planning (Detail Engineering)
Turnkey plant installation (turn-key)
Execution of ATEX-compliant systems
Commissioning, proof of service provision
Support for investment subsidies (promotion management)
System Support - After Sales
Inspection and verification
Testing and service of explosion-technical installations (according to ATEX)
Plant monitoring, preventive maintenance
Remodeling and extension
Maintenance and repair
Preparation of reports and expert opinions
We are an authorized office for environmental measurements
Our experienced and highly qualified environmental engineers are equipped with state-of-the-art measuring technology and laboratory equipment for environmental analysis. The results and evaluations of the fluidic parameters, the GLV/TLV measurements, the exhaust air measurement and further data are documented in the Kappa measurement protocol.
Our services include:
Emission measurements at the workplace (GLV/TLV value measurements)
Determination of emission levels and their spread
Measurements of indoor air concentration
Raw gas measurement
Clean gas measurements
Sound level measurements
New Building Or Replacement Investment
No matter if new building, conversion or extension of a plant.
Our services optimize air technology and save costs along the entire life of a future-proof, industrial production.
We take into account the entire production infrastructure as well as the interface of production technology, building services and production buildings.
Holistic optimization of indoor air and exhaust air technology brings decisive advantages for building and production technology:
The investment costs are minimized.
The operating costs are reduced.
The potential for energy recovery is fully exploited.
Even after years, the low residual emissions are still well below the prescribed limit values.
High Quality Products
Integrative, state-of-the-art solutions are no coincidence.
We are a development driven company with a high research quota. In this way, we create solutions and products of consistently high quality and with absolute reliability. They ensure an optimal working environment for the protection of employees, production facilities and buildings and for maximum energy efficiency. Our concepts, systems and products often redefine the state of the art - for example, in the separation of fine dust and nanoparticles, the large-scale dedusting, the elimination of diffuse emissions, energy recovery or air diffusion.
Because every business is different, we have a separate solution for each.
Industrial air pollution and energy efficiency along the entire manufacturing chain is a thing of experience. We care about these industries:
Automotive and vehicle industry, automotive supplier
Printing and paper industry
Fire brigades and operational centers
Foundries Iron and steel casting Light metal casting Non-ferrous metal casting
Metallbe- und metallverarbeitende Industrie
Metalworking Iron and Steel Works Lightweight Metal Plants Non-Ferrous Metals
With this QR code you can access this website directly – fast and easy
Using a QR code scanner app on your device, you can scan the image to the left and go straight to this site on our website.
Corona virus – acting responsibly in a special situation
The Austrian federal government has recently set drastic measures to fight the spread of the corona virus.
We also make our active contribution to protecting our employees, customers, partners and the society. Most of our employees will therefore be working from home in teleworking. We initially refrain from personal visits by our technicians. As an alternative, we can offer you video conferencing. Our sales, service and order processing staff can still be reached at their respective mobile phone numbers and via email.
Our switchboard is currently available during limited hours. We therefore ask you to send us your request by email (firstname.lastname@example.org).
We will arrange further processing of ongoing orders, service, maintenance or work in ongoing projects in close consultation with you.
We are shure that we will manage this current challenge together.
Thank you for your understanding and stay healthy.